All landlords have a legal duty to make sure that electrical appliances and wiring in your home are safe
The condition and safety of appliances you bring into your home are your responsibility. If you have any doubts about the safety of your apppliance, get it tested or replace it.
Look out for these danger signs when using appliances
- Frayed, cut or damaged leads.
- Cracked or damaged cases on plugs or appliances.
- Burn marks on plugs, leads or appliances.
- Blowing fuses or tripping circuit breakers.
- Loose cord grips in plugs or appliances.
If you notice any of the above danger signs, stop using the appliance and report the problem to your landlord straight away.
Visit the Electrical Safety First website for more information on Electrical Safety.
- Do report any problems with the electrical installation or appliances to your landlord straight away.
- Do use appliances according to the manufacturer’s instructions.
- Do use an RCD when using electrical equipment outdoors.
- Do regularly check the condition of plugs, cables and extension leads.
- Do check that any adaptor used complies with British Standards and is adequately rated for the connected load.
- Do remove plugs from sockets carefully. Pulling out a plug by the cable puts a strain on the terminations which can be dangerous.
- Don't carry out DIY repairs on electrical installations or appliances.
- Don't bring mains powered portable appliances into the bathroom.
- Don't ignore worn flexes on appliances.
- Don't use any electrical appliance with wet hands.
- Don't use adaptors plugged into other adaptors.
- Don't overload adaptors, particularly with high current appliances such as kettles, irons and heaters.
- Do not attempt to extend, repair or replace damaged or worn-out parts of the electrical installation yourself.
- Ensure all electrical appliances are used responsibly and in accordance with the manufacturer’s instructions.
- Report any problems with the electrical installation or appliances to your landlord straight away.
- Allow access to the property should an electrician need to visit to carry out an inspection of the electrical installation/fix any reported problem.
The safety of appliances you bring into your accommodation is your responsibility. If you are in any doubt as to the safety of an appliance get it tested or replaced.
What to look for in new accommodation
- An electrical report confirming that the electrical installation is safe for use (known as a Periodic Inspection Report).
- Certification confirming that any recent electrical work meets the UK national standard BS 7671 (Requirements for Electrical Installations).
- That sockets, switches and light fittings are in good condition with no signs of damage.
- That any appliances are provided with manufacturer’s instructions, have up to date PAT test stickers on them (not required if appliance is new and has not been used before) and are in good working order.
Your landlord is required by law to ensure that:
- the electrical installation in a rented property is safe when a tenancy begins;
- the electrical installation is maintained in a safe condition throughout the tenancy; and
- any appliance provided is safe and has at least the CE marking (which is the manufacturer’s claim that it meets all the requirements of European law).
In order to meet the above requirements your landlord will need to carry out regular basic safety checks to ensure that electrical installations remain in good working order.